PROTOTYPE
Class C PacIfic Coast Shay N0.3312 built in 1927 at
Lima Locomotive Works, U.S.A.
Weight: 92.5 tons
Gauge of truck: 4' 8-1/2"
Fuel: Oil
Boiler pressure: 200 Lbs./in2 . |
| SCALE |
1-3/32" = 1' (1/11.2 full scale) |
| GAUGE |
5" (127 rTm) or 4-3/4" (121mm) |
| DRIVING WHEELS |
Diameter 83 mm (3-1/4") |
| GEAR RATIO |
2.368 : 1 |
| CYLINDERS (TRIPLE) |
BORE 30mm (1-3/16")
STROKE 34mm (1-11/32")
DRAIN 6 cocks (hand) |
| PISTON VALVES |
BORE 16mm (5/8")
TRAVEL 11mm (7/16")
FULL GEAR CUT-OFF 80%
PORT OPENING 3.2 mm(1/8") |
| VALVE GEARS |
Stephenson's Launch-type |
BOILER
Tapered Barrel
Material: A11 copper, silver soldered throughout
Twin Pop Type Safety Valves
Hydraulic Test Pressure: 14 kg/cm2 (200 Lbs/in2)
Working Pressure: 6.3 kg/cm2 (90 Lbs/in2)
Water Capacity: Approx. 4 lit. (140 oz)
Grate area:114mm x 200mm(4-1/2" x 7-7/8")
Fuel: Coal or Liquefied Petroleum Gas
Regulator: Screw Type
Superheater: Outer Dia. 6mm stainless steel tubes 6 pcs. |
WATER SUPPLY SYSTEM
Axle driven double acting pumps:D14mm x 17mm stroke
(ÿ9/16" x 5/8" stroke)
Hand pump: ÿ14mmx 35mm stroke(ÿ9/16" x 1-3/8")
Injector (Optional extra): Dry range 3-5kg/cm2 (43-71 Lbs/in2 )
Capacity 600 cc/min. (21oz/min.)
Donkey pump (Optional extra): Westinghouse air compressor type
ÿ10 mm x 20 mm stroke
(ÿ 3/8" x 3/4" stroke)
Feed water heater: Copper tubes 9 pcs.
O.D. 8 mmx 190 mm (O.D.5/16" x 7-1/2") |
LUBRICATORS
For cyiinders; Mechanical single ram type ÿ3 mrn x 6.6
mm stroke (ÿ1/8" x 1/4" stroke)
Ratchet 34 teeth feeding
Recommended oil : Steam oil
Oil tank capacity: 52 cc (1.8 oz)
For crankshaft bearing parts and valve crosshead sliding parts;
One way clutch single ram type
ÿ3 mm x 6.6mm stroke (ÿ1/8" x 1/4" stroke)
Recommended oil : Machine oil
Oil tank capacity: 26 cc (0.9 oz) |
| STEAM WHISTLE |
3 Note Chime |
| BRAKES |
2 Steam brake cylinders Dia. 20mm (Dia. 3/4") Hand brake
equipped on engine and tender (These can be operated indipendantly.) |
| STEAM TURBO GENERATOR |
Output 3V x 0.1A (Optional extra) |
| LIQUEFIED PETROLEUM GAS BURNER & VALVE |
(Optional extra) |
| MAIN TRUCKS BEARINGS |
6 Needle bearings
4 Thrust needie bearings |
| WEIGHT |
Engine 68kg (150 Lbs)
Tender (included driver's seat) 32kg (71 Lbs)
Tender water capacity Approx. 10lit (2.2 gal or 2.64 U.S. gal) |
| SIZE |
Length 1,650mm(65") Width 260 rnm (10-1/4")
Height 380mm(15")
Wheel bases
Truck 120mm (4-3/4") Engine 830mm (32-11/16")
Tender 414mm (16-5/16") Engine & Tender 1423mm(56" ) |
